Имэйл: [email protected]
VSI5X Sand Making Machine
On the basis of introducing German technologies on sand-making machines and upgrading the VSI Sand Maker, SBM develops and researches a new generation of sand-making machine— VSI5X Sand Maker. VSI5X sand making machine has multiple independent property rights and integrates 3 kinds of crushing modes. Now, VSI5X sand Maker is the core equipment in machine-made sand industry.
Бүтээгдэхүүний онцлог: Lower maintenance costs, longer service life of vulnerable parts, quicker adjustments
- Оролтын хэмжээ: 0-50мм
- Хүчин чадал: 70-640TPH
- Материал: Боржин чулуу, quartz, базальт, хайрга, шохойн чулуу, доломит, гэх мэт.
Гүйцэтгэл
Optimized Impeller Enhances Efficiency By 30% And Reduces Wear By 40%
Through systematic mechanical analysis and verification, SBM optimized the structures of impeller and vulnerable parts. Compared with the traditional sand makers, VSI5X Sand Maker obviously increases the material throughput and ratio of crushing, and enhances the working efficiency by 30%-60%. The wear costs of vulnerable parts reduce by more than 40%.
Hydraulic Device to Open the Cover Automatically Reduces Maintenance Costs
In consideration of the maintenance and part replacement during the production of the sand maker, SBM introduced semi-automatic hydraulic system. By only pressing a button, users can open the top cover of the machine to carry out following operations. Тэгэхээр, this system greatly saves labor costs and enhances the service efficiency.
Split-Type Structure, Extended Service Life of Spare Parts
Based on the actual situations of production, we found that some spare parts like the periphery guard board and impact block always wear terribly at some specific points. Тэгэхээр, to avoid this phenomenon, SBM adopts the split-type structure when designing quick-wear parts, which not only greatly extends service life of quick-wear parts, but also reduces their using costs a lot.
Brand New Feed Mode
In consideration that customers may have two production demands (i.e. sand making and shaping) which require the switch between central feeding and fall feeding, SBM made a brand new improved design on the material distributing tray so that users can easily switch the feed mode, shortening downtime for adjustments.
Тоонжуулсан боловсруулалт, Илүү өндөр нарийвчлал
Тоон хяналтын машин хэрэгслийн олон арван шугам байдаг. ган хавтан зэрэг үйл ажиллагаа’ огтлох, гулзайлгах, төлөвлөлт, тээрэмдэх, будаг шүрших зэрэг нь бүгд тоогоор хянагддаг. Машины боловсруулалтын нарийвчлал өндөр, ялангуяа үндсэн хэсгүүдийн хувьд.
Сэлбэг хэрэгслийн хангалттай хангамж, Санаа зоволтгүй ажиллагаа
SBM, бизнесүүд нь үйлдвэрлэл, борлуулалтыг хамардаг, өөрсдийн үйлдвэрлэсэн машин бүрийг хариуцдаг. Санаа зоволтгүй ажиллахын тулд бид үйлчлүүлэгчдэд бүтээгдэхүүн, анхны сэлбэг хэрэгслийн техникийн үйлчилгээг санал болгож чадна.
Ажлын зарчим
VSI5X Vertical-shaft Impact Crusher (also known as “Sand Maker”) has two feed modes – “feed at center” болон “feed at center & sides”. As for the former mode “feed at center”, materials at the feed hopper firstly pass through the central hole into the high-speed spinning rotor. In the rotor, materials are fully accelerated and thrown outwards from the launching port to collide with a part of materials that freely fall after rebound. Дараачийн, materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. Эцэст нь, finished products are discharged from the bottom discharge opening. As for the latter mode “feed at center & sides”, firstly, materials at the feed hopper pass through the circular hole. Дараа нь, materials are divided into two parts by the distributing tray. One part of materials enter the high-speed rotating impeller while the other part of materials fall from all sides of the tray. Materials in the impeller would be accelerated rapidly and thrown outwards at a high speed to collide with materials falling from all sides of the tray. Дараачийн, all materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. Эцэст нь, finished products are discharged from the bottom discharge opening.
Бүтээгдэхүүний параметрүүд
| Загвар | Soft material | Hard material | Side and central feeding | Fully central feeding | Speed (эрг / мин) | Хүч (кВт) | Ерөнхий хэмжээс (мм) |
| Хамгийн их тэжээлийн хэмжээ (мм) | Throughput (т/ц) | ||||||
| VSI5X1145 | 50 | 45 | 500-640 | 250-360 | 1100-1310 | 220×2 | 5000×2790×3320 |
| VSI5X9532 | 45 | 40 | 350-540 | 180-280 | 1300-1510 | 160×2 | 4560×2600×2900 |
| VSI5X8522 | 40 | 35 | 240-380 | 120-190 | 1500-1700 | 110×2 | 4140×2500×2700 |
| VSI5X7615 | 35 | 30 | 150-280 | 70-140 | 1700-1900 | 75×2 | 4100×2330×2300 |
Анхаарна уу:
Загваруудын талаархи бүтээгдэхүүний зураг, параметрүүд, өгөгдөл, Энэ вэбсайт дээрх гүйцэтгэл, техникийн үзүүлэлтүүд нь зөвхөн лавлагаанд зориулагдсан болно. SBM дээр дурдсан мэдээлэлд өөрчлөлт оруулах магадлал бий. Тодорхой мессежийн хувьд, бодит объектууд болон хэрэглэгчийн гарын авлагаас лавлана уу. Тусгай зааваргүйгээр, SBM нь энэ вэбсайтад хамаарах бүх өгөгдлийг тайлбарлах эрхтэй.