VSI5X Sand Making Machine

VSI5X Sand Making Machine

On the basis of introducing German technologies on sand-making machines and upgrading the VSI Sand Maker, SBM develops and researches a new generation of sand-making machineVSI5X Sand Maker. VSI5X sand making machine has multiple independent property rights and integrates 3 kinds of crushing modes. Now, VSI5X sand Maker is the core equipment in machine-made sand industry.

características do produto: Lower maintenance costs, longer service life of vulnerable parts, quicker adjustments
  • Tamanho de entrada: 0-50milímetros
  • Capacidade: 70-640TPH
  • Material: Granito, quartz, basalto, pebble, calcário, dolomite, etc..

Desempenho

Optimized Impeller Enhances Efficiency By 30% And Reduces Wear By 40%

Through systematic mechanical analysis and verification, SBM optimized the structures of impeller and vulnerable parts. Compared with the traditional sand makers, VSI5X Sand Maker obviously increases the material throughput and ratio of crushing, and enhances the working efficiency by 30%-60%. The wear costs of vulnerable parts reduce by more than 40%.

Hydraulic Device to Open the Cover Automatically Reduces Maintenance Costs

In consideration of the maintenance and part replacement during the production of the sand maker, SBM introduced semi-automatic hydraulic system. By only pressing a button, users can open the top cover of the machine to carry out following operations. Então, this system greatly saves labor costs and enhances the service efficiency.

Split-Type Structure, Extended Service Life of Spare Parts

Based on the actual situations of production, we found that some spare parts like the periphery guard board and impact block always wear terribly at some specific points. Então, to avoid this phenomenon, SBM adopts the split-type structure when designing quick-wear parts, which not only greatly extends service life of quick-wear parts, but also reduces their using costs a lot.

Brand New Feed Mode

In consideration that customers may have two production demands (i.e. sand making and shaping) which require the switch between central feeding and fall feeding, SBM made a brand new improved design on the material distributing tray so that users can easily switch the feed mode, shortening downtime for adjustments.

Processamento Digitalizado, Maior precisão

Existem dezenas de linhas de máquinas-ferramentas de controle numérico. Operações como placas de aço’ corte, flexão, planejamento, fresagem e pulverização de tinta são todos controlados numericamente. A precisão de usinagem é alta, especialmente para as peças principais.

Fornecimento suficiente de peças sobressalentes, Operação sem preocupações

SBM, cujos negócios cobrem produção e vendas, assume a responsabilidade por cada máquina produzida por nós mesmos. Podemos oferecer aos clientes serviços técnicos sobre produtos e peças de reposição originais para garantir uma operação sem preocupações.

Princípio de trabalho

VSI5X Vertical-shaft Impact Crusher (also known asSand Maker”) has two feed modes –feed at center” e “feed at center & sides”. As for the former modefeed at center”, materials at the feed hopper firstly pass through the central hole into the high-speed spinning rotor. In the rotor, materials are fully accelerated and thrown outwards from the launching port to collide with a part of materials that freely fall after rebound. Próximo, materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. Finalmente, finished products are discharged from the bottom discharge opening. As for the latter modefeed at center & sides”, firstly, materials at the feed hopper pass through the circular hole. Então, materials are divided into two parts by the distributing tray. One part of materials enter the high-speed rotating impeller while the other part of materials fall from all sides of the tray. Materials in the impeller would be accelerated rapidly and thrown outwards at a high speed to collide with materials falling from all sides of the tray. Próximo, all materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. Finalmente, finished products are discharged from the bottom discharge opening.

Parâmetros do produto

Modelo Soft material Hard material Side and central feeding Fully central feeding Speed (rpm) Poder (kW) Dimensão global (milímetros)
Tamanho máximo de alimentação (milímetros) Throughput (º)
VSI5X1145 50 45 500-640 250-360 1100-1310 220×2 5000×2790×3320
VSI5X9532 45 40 350-540 180-280 1300-1510 160×2 4560×2600×2900
VSI5X8522 40 35 240-380 120-190 1500-1700 110×2 4140×2500×2700
VSI5X7615 35 30 150-280 70-140 1700-1900 75×2 4100×2330×2300

Observação:

Imagens do produto e parâmetros sobre modelos, dados, desempenhos e especificações neste site são apenas para referência. Há uma chance de que a SBM faça alterações nas informações mencionadas acima. Para mensagens específicas, consulte os objetos reais e manuais do usuário. Sem instruções especiais, A SBM reserva-se o direito de explicar todos os dados envolvidos neste website.

Índice

Postagens Relacionadas