อีเมล: [email protected]
เครื่องทำทราย VSI6X
Due to the increasing market demand for the scale, intensification, energy conservation, environment protection and high-quality machine-made sand, เอส.บี.เอ็ม, a Chinese professional sand making machine manufacturer, further optimizes the structure and function of traditional vertical-shaft impact crushers and launches a new generation of sand-making and reshaping machine with high efficiency and low costs — เครื่องทำทราย VSI6X.
คุณสมบัติของสินค้า: Lower maintenance costs, longer service life of vulnerable parts, bigger capacity
- ขนาดอินพุต: 0-50มม
- ความจุ: 100-583ทีพีเอช
- วัสดุ: หินแกรนิต, ควอตซ์, หินบะซอลต์, กรวด, หินปูน, โดโลไมต์, ฯลฯ.
ผลงาน
“Rock On Rock” และ “Rock On Iron” Crushing
In order to meet the crushing demand of different customers, VSI6X Sand Making Machine takes two crushing methods— “rock on rock” และ “rock on iron”(which refer to “rock hitting rock” และ “rock hitting iron” respectively). The material liner of “rock on rock” and counter block structure of “rock on iron” are designed specially according to the working condition of the sand-making machine, which greatly promotes the crushing ratio of the sand maker.
New Structural Designs of Key Parts
In order to ensure the overall performance of the sand making machine, key parts on it is optimized on their structures, such as the impeller, the bearing cylinder and the main body. Several national patent technologies SBM owns ensure the high yield, high efficiency and low cost of the crushing machines in crushing operation.
Lower Costs in Usage and Maintenance
VSI6X Sand Making Machine is optimized on some structures and crafts of the impeller. The service life of some wearing parts is prolonged by 30~200% compared to the previous crushing machines under the same usage conditions. VSI6X Vertical-shaft Sand Maker is configured with simple lifting device. When the sand maker needs maintenance, the lifting of the impeller and the bearing cylinder needs no extra-large lifting devices, greatly lowering the maintenance difficulty of the sand maker.
Safer and More Reliable Operation
When designing this sand making machine, the safety and reliability are taken into consideration. The more stable and reliable dual-motor drive and automatic diluted oil lubrication are adopted and at the same time, the gunk and the maintenance platform are optimized to ensure the safety and reliability of operation.
การประมวลผลแบบดิจิทัล, ความแม่นยำสูงกว่า
เครื่องมือเครื่องจักรควบคุมเชิงตัวเลขมีหลายสิบบรรทัด. ประกอบกิจการ เช่น แผ่นเหล็ก’ ตัด, ดัด, การวางแผน, การกัดและการพ่นสีควบคุมด้วยตัวเลขทั้งหมด. ความแม่นยำของเครื่องจักรสูง, โดยเฉพาะอย่างยิ่งสำหรับชิ้นส่วนหลัก.
การจัดหาอะไหล่ที่เพียงพอ, การทำงานที่ไร้กังวล
เอส.บี.เอ็ม, ซึ่งดำเนินธุรกิจครอบคลุมทั้งด้านการผลิตและการขาย, รับผิดชอบทุกเครื่องที่ผลิตเอง. เราสามารถให้บริการทางเทคนิคแก่ลูกค้าเกี่ยวกับผลิตภัณฑ์และชิ้นส่วนอะไหล่แท้เพื่อให้การทำงานเป็นไปอย่างไร้กังวล.
หลักการทำงาน
เครื่องทำทราย VSI6X (also known as “ช่างทำทราย”) has two feed modes – “feed at center” และ “feed at center & sides”. As for the former mode “feed at center”, materials at the feed hopper firstly pass through the central hole into the high-speed spinning rotor. In the rotor, materials are fully accelerated and thrown outwards from the launching port to collide with a part of materials that freely fall after rebound. ต่อไป, materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. ในที่สุด, finished products are discharged from the bottom discharge opening. As for the latter mode “feed at center & sides”, firstly, materials at the feed hopper pass through the circular hole. แล้ว, materials are divided into two parts by the distributing tray. One part of materials enter the high-speed rotating impeller while the other part of materials fall from all sides of the tray. Materials in the impeller would be accelerated rapidly and thrown outwards at a high speed to collide with materials falling from all sides of the tray. ต่อไป, all materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. ในที่สุด, finished products are discharged from the bottom discharge opening.
พารามิเตอร์ผลิตภัณฑ์
แบบอย่าง | Sanding making | Reshaping | Sanding making | Reshaping | ความเร็ว (รอบต่อนาที) | พลัง (กิโลวัตต์) | มิติโดยรวม (มม) |
ขนาดการให้อาหารสูงสุด (มม) | Throughput (ไทย) | ||||||
VSI6X8015 | 30 | 40 | 109-117 | 131-214 | 1300-1700 | 75×2 | 4100×2300×2750 |
VSI6X9026 | 35 | 45 | 167-179 | 200-313 | 1200-1500 | 132×2 | 4200×2400×3150 |
VSI6X1040 | 40 | 50 | 264-283 | 317-495 | 1100-1400 | 200×2 | 4880×2560×3725 |
VSI6X1150 | 45 | 55 | 344-368 | 413-644 | 1000-1300 | 250×2 | 5500×2750×3950 |
VSI6X1263 | 50 | 60 | 454-486 | 545-849 | 900-1200 | 315×2 | 5700×2980×4190 |
VSI6X1380 | 50 | 60 | 601-643 | 721-1125 | 800-1100 | 400×2 | 7900×3260×4183 |
VSI6X13100 | 50 | 60 | 751-804 | 940-1407 | 800-1100 | 500×2 | 7900×3260×4183 |
บันทึก:
รูปภาพสินค้าและพารามิเตอร์เกี่ยวกับรุ่น, ข้อมูล, การแสดงและข้อมูลจำเพาะบนเว็บไซต์นี้มีไว้สำหรับอ้างอิงเท่านั้น. มีโอกาสที่ SBM อาจทำการเปลี่ยนแปลงข้อมูลที่กล่าวถึงข้างต้น. สำหรับข้อความเฉพาะ, โปรดดูของจริงและคู่มือผู้ใช้. โดยไม่มีคำแนะนำพิเศษ, SBM สงวนสิทธิ์ในการอธิบายข้อมูลทั้งหมดที่เกี่ยวข้องในเว็บไซต์นี้.